Descrizione disponibile anche in:
Description This slot bracket by Delock can be installed into a standard PC slot and expands your system by four external USB 3.0-A ports. Thus you can connect different USB 3.0 devices, like e.g. external enclosure, Card reader, memory etc. Since the USB 3.0-A interface is compatible to its forerunners USB 2.0 and USB 1.1, you can still use your existing USB devices. Specification Connector: internal 2 x 19 pin USB 3.0 pin header female ---------------------- external 4 x USB 3.0-A female Cable gauge: 28 AWG Current output: max. 900 mA per each USB port Voltage: 5 V Data transfer rate up to: Super-Speed 5 Gb/s, -------------------- ---------------------- - High-Speed 480 Mb/s, --------------------------------------------- Full-Speed 12 Mb/s, ---------------- --------------------------- -Low-Speed 1.5 Mb/s Downwards compatible to USB 2.0 and USB 1.1 Cable length: ca. 40 cm (without connector) System requirement PC with a free slot Mainboard with two free 19 pin USB 3.0 pin header connector Note: For operation of four devices at the same time, which require more than 900 mA ---------- for--each device, you may need to connect an additional power supply for the ---------- connected-device. Package content Slot bracket Package Delock poly bag
 |
Confezione: |
|
| |
Peso Lordo: 1 Kg
Dimensioni Lorde: 40x205x150 mm |
|
| |
|
|
|
Delock - Sito web:http:// |
|
| |
|
|
| |
|
|
|
SCHEDA PRODOTTO 
Disponibile c/o Vendor
